cool recrowning kit video

[flatshooter]

http://www.youtube.com/watch?v=b23lfzpZrJ4 (11 degree)
http://www.youtube.com/watch?v=-Xpzv1Spsnk&feature=related (regular crown)

The guy didn't mention how much the kit was but that it it's for the home hobbiest.

[drybean]

looks like my kwik way valve seat cutters

[Don - LongRangeSupply]

The "guy" in that video is Dave Manson himself. Those Manson tools will put a better crown on your barrel than most gunsmiths can do on a lathe.

Here is the price list for the standard hand cranked unit. The military style electric driver interface should be cheaper.

http://www.mansonreamers.com/PriceList.htm

Quite a few precision shooters will recrown their barrels ever X hundred rounds to maintain the utmost accuracy. Doing it yourself rather than sending it out to a smith, in cases like that would easily recoup the cost of the Manson tools.

If I was a working gunsmith, there is no question that I would use his tools to crown rather than a lathe.

[flatshooter]

I just had one done for 48 bucks... from a smith..

Seems like a good kit.

[juanvaldez]

I recessed target crown can be done with a LEE case trimmer. Ya...I laughed too till I tried it. Use one caliber under for the mandrel and bush it with some brass shim stock

[bsekf]

Cheaper than a lathe, but still pretty pricey. Why don't one of you young guys buy the kit and then rent it to us old guys.

Bill