RC20
07-18-2016, 10:09 AM
RCBS used to have you set to the shell holder and then (from memory) a quarter turn. That gave you a hard cam over and a lot of shoulder bump back.
I am going to check it on a sacrificial piece of brass just to see what it really came out to.
I can close the bolt on .002, its just hard and I don't care to do that. I don't like forcing things. I know there are zero chamber advocates and for them that's fine, I don't like it from a mechanical take due to the binding of the bolt and don't do it.
Anneal yes, but that has to do with neck not shoulder though it spills over onto the shoulder a bit.
Minimal setback is for the base crack problem.
I am going to check it on a sacrificial piece of brass just to see what it really came out to.
I can close the bolt on .002, its just hard and I don't care to do that. I don't like forcing things. I know there are zero chamber advocates and for them that's fine, I don't like it from a mechanical take due to the binding of the bolt and don't do it.
Anneal yes, but that has to do with neck not shoulder though it spills over onto the shoulder a bit.
Minimal setback is for the base crack problem.