Factory Stock / Action Assembly Gap

[DenverDave]

Is it normal for there to be a gap, under the safety part of the action and the factory stock on a model 10? Or is my action not in the stock correctly?

http://uploads.tapatalk-cdn.com/20160709/0a975f50c6fcea57b34e54f889daa604.jpg

http://uploads.tapatalk-cdn.com/20160709/878b52cf8627a0f89eeff12cd2163e93.jpg

http://uploads.tapatalk-cdn.com/20160709/1b8d5380e16a3d2baddfd1f968bd18f9.jpg


Sent from my iPhone using Tapatalk

[short round]

That is good, they are more accurate, if the tang does not touch stock.

[DenverDave]

That is good, they are more accurate, if the tang does not touch stock.

Ok cool. I have been adjusting the torque on the stock/receiver screws because I had been experiencing some mag feeding issues so i loosened it up a bit....

BTW: good to know that's called a "tang"
Sent from my iPhone using Tapatalk

[Zero333]

Yea like Short Round said, Savage safety tangs should be free floated.

[Texas10]

Tang, it's not just for astronauts!