PDA

View Full Version : New Axis in 223



Wayne Powell
06-22-2016, 08:36 PM
Picked up a new one. Took it out today after mounting a scope to a least get it on paper. Understand it may be a journey to make it an "accurate" rifle. I had some Olympic 223 ammo that I had squirreled away. Though it would be good for getting it on paper. I was surprised to find that about 50% of the ammo would not fire. Wondering if this is a problem with a weak firing pin spring or just bad ammo. Will run the "bad ammo" through an AR-15 later to see. Anyone else had a problem with a weak firing pin spring?

Texas10
06-22-2016, 09:55 PM
Try some American Eagle Tipped Varmint, 50 grain and report back. It's cheap and part number is AE223GTV. Usually shoots sub 3/4 moa.

smbob
06-22-2016, 09:59 PM
I'd try some different ammo. PMC 55gr, Hornady 55gr, etc...

Robert

wbm
06-23-2016, 09:44 AM
Try some American Eagle Tipped Varmint, 50 grain and report back. It's cheap and part number is AE223GTV. Usually shoots sub 3/4 moa.

+1.

Wayne Powell
06-23-2016, 12:25 PM
All good advice. I had planned to do some handloads since the results I did get with the rounds that fired was nothing to write home about.