Bolt part # comparison, 12 Target action, .223 to Std, LH

[brgipple]

Hey everyone, thought i would share some in formation i found in doing some research. I am changing my 12 LRPV from .223 to 6.5CM. As the helpful people here pointed out his comes with some bolt changes. i was looking for the all the parts that were different and came up with the below list (these are for stainless parts, not blued) (and a LH port). hope this helps someone else in my shoes down the line

Disclaimer: verify with savage before taking my word on the part numbers!


Name

Diagram Number

Part Number .223

Part Number Std



Firing Pin Assembly

11

>

107348



Cocking Piece

11B

>

107345



Cocking Piece Lock Washer

11C

>

103494



Main Spring

11D

>

104279



Washer Firing Pin Stop Nut

11E

>

100303



Firing Pin Stop Nut

11F

>

107344



Firing Pin Short Magnum

11G

>

107343



Bolt Assembly

12

108392

108393



Cocking Piece Pin

12A

>

107346



Rear Baffle

12B

>

106164



Target Bolt Handle

12C

>

108189



Cocking Piece Sleeve

12D

>

107347



Bolt Body

12G

>

107480



Bolt Retaining Pin

12H

>

103978



Front Baffle Washer

12I

>

100293



Front Baffle

12J

103321

103322



Bolt Head, LH, Ground

12K

107481

107482



Extractor

12L

102278

100139



Extractor Spring

12M

>

100257



Extractor Ball

12N

>

100214



Ejector

12O

>

100129



Ejector Spring

12P

103611

100131



Ejector Retaining pin

12Q

>

100130



Bolt Assembly Screw S.S.

12S

>

102522














I did not see this posted anywhere else, sorry if this has already been posted.

[RC20]

Nice, very good, had not seen that information as well.