View Full Version : Removing Ejector.
mikgarus
06-19-2016, 01:37 PM
Trying to remove ejector from a Model 10 .223 rem.
Cannot take out tiny pin holding it. Help! Ideas please!
Hotolds442
06-19-2016, 03:27 PM
It can only be removed from one direction. I use a custom pair of vise grips that have a pin set in one jaw and a hole drilled in the other jaw for the pin to pass through.
Nor Cal Mikie
06-19-2016, 05:53 PM
Very small finishing nail!
Robinhood
06-19-2016, 08:15 PM
A vise and a sandwich bag helps.
short round
06-20-2016, 04:37 PM
1/16 " punch & tap it towards c notch on bolt head.
mikgarus
06-20-2016, 05:19 PM
thanks everyone. i got it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.