Target Action sear spring

[Ratbuster]

There are two sear spring part numbers listed for Savage 110's: 1348800A and 1348800B. Which one should I get for the Target Action? I had one fly away from me in my office, never to be found.

Thanks for your help.

Phil

[Hotolds442]

Those are not Savage part numbers.
Enter your serial number into the Savage Part Finder and order the correct spring from Savage based on the info you find in the schematic.

[Ratbuster]

Savage will only sell the sear spring to gunsmiths

[Hotolds442]

And they'll send you(anybody for that matter) a liability release form that you sign and fax back, then they takes your money and sends you your parts.

[triehl27]

You can order a Target sear spring from The Gun Shack, who is listed under the site sponsors.

One word though, shipping is high.


And they'll send you(anybody for that matter) a liability release form that you sign and fax back, then they takes your money and sends you your parts.

[foxx]

There are two different springs

1. Sear

2. trigger reset

[Texas Solo]

I got a spring from Northland. Put it in my buddy's #11VT. Smooth as butta.

[drybean]

To me the sear spring is the one on the sear

the trigger spring or some people call it the return spring , is the spring that you adj. for pull weight
I may be able to help with both

[Vanilla Gorilla]

Call Jim at NSS. He should be able to help you. I bought my target spring from him.

[RC20]

I got my Varmint trigger spring from Jim and works per the Savage Varmint and just fine.

Not ready to go to the target setup (and that requires the sear change if I have it right)

[Zero333]

Savage part #103894

Brownells sells them for $4... their Part # is 855-000-270WB or just do a search for "savage sear" and the spring will appear in the search.

[drybean]

He is asking about a sear spring , Not a trigger spring