PDA

View Full Version : Model 10T vs 12 LRP


brfussell
05-28-2016, 06:23 PM
If there any difference in the actions of a 10T and 12 LRP?
Kingair001
05-30-2016, 09:01 AM
If I am correct the 12 LRP uses a Target action

Sent from my SM-N920T using Tapatalk
Robinhood
05-30-2016, 10:41 AM
The LRP has the desirable 2 screw (4.4" screw spacing) repeater target action. Right port with bottom feed.

The 10T has the desirable plain ol' Model 10 action (4.4" screw spacing). Open top eject with bottom feed
Newsshooter
05-30-2016, 11:04 AM
The LRP has the desirable 2 screw (4.4" screw spacing) repeater target action. Right port with bottom feed.

The 10T has the desirable plain ol' Model 10 action (4.4" screw spacing). Open top eject with bottom feed

The LRP has a closed top and the target trigger.
Kingair001
05-30-2016, 11:08 AM
The LRP has a closed top and the target trigger.
And I like the trigger very much !

Sent from my SM-N920T using Tapatalk
Robinhood
05-30-2016, 11:14 AM
The LRP has a closed top and the target trigger.

And the large diameter threads.
Newsshooter
05-30-2016, 07:23 PM
And the large diameter threads.

Yep, large shank barrel too....
DenverDave
06-09-2016, 01:18 AM
Barrel is fluted on the 12 LRP. LRP comes with B&C Stock, 10T is the AccuStock. I just got a 10T... I think of it as the poor man's LRP.
Kingair001
06-09-2016, 01:26 AM
... I think of it as the poor man's LRP.
That's what most people think about a Savage 😂



Sent from my SM-N920T using Tapatalk
Robinhood
06-09-2016, 01:29 AM
LRP comes with B&C Stock,

Huh? Try H-S precision.
Kingair001
06-09-2016, 01:32 AM
Huh? Try H-S precision.
My 12 LRP has a HS Precision stock - PST 114

But there is or was also another version with an Accustock PSV 118

Barrel on a 10T is 24" and on the 12 LRP 26"

Sent from my SM-N920T using Tapatalk
DenverDave
06-09-2016, 02:41 AM
Huh? Try H-S precision.

My bad. Apologies. Thanks for pointing that out.


Sent from my iPhone using Tapatalk
DenverDave
06-09-2016, 03:20 AM
I like my Model 10T, especially at $580 out the door. Cabellas had it on sale last week. I am just getting to know the rifle as I have only shot it once. My one issue is the stock height and or optics rail height. With low rings I need a riser to get a scope picture.

Excuse the ghetto fab DIY cheek riser in the photo. It is a work in progress.

http://uploads.tapatalk-cdn.com/20160609/9bf3d322b5b36f044f63090d4c689265.jpg


Sent from my iPhone using Tapatalk
Kingair001
06-10-2016, 12:46 AM
Excuse the ghetto fab DIY cheek riser in the photo. It is a work in progress.
Sent from my iPhone using Tapatalk
You'll get there for sure !
savgebolt
06-11-2016, 11:43 AM
dave ,,,,,, you might check out beartooth comb raising kit,,,,,,, i have them , i like them