Which bolt face for Savage 16 going from .223 to .308?

[Upjeeper]

I have a Savage model 16 (short action, .223 caliber with a bolt face size of 0.384") that i'm going to be rebarreling into a .308 (bolt face size of 0.470")
I've seen that PTG has bolt faces for around $90, but i've also seen Brownells has them for around $40. It's not a benchrest gun but more a deer rifle so i'd rather not spend the extra $50 if I can (money is tight).
The problem is, Brownells has several different bolt faces in the size i need but their catalog isn't real descriptive.
I think this is the one i want
http://www.brownells.com/rifle-parts/bolt-parts/bolts/bolt-head-standard-right-hand-prod12808.aspx
but it doesn't even call for a bolt face size of 0.470"


please and thank you

[drybean]

Gun Shack has what you need $32 in stock

[drybean]

sorry there out of stock

[RustyShackle]

I think you want this

http://www.brownells.com/rifle-parts/bolt-parts/bolts/bolt-head-bolt-head-sku855-000-283-20652-45763.aspx

Part Number 104876

This is what I used going up to 7mm-08 from 223

[earl39]

The thing is you want to make sure you don't end up with a long action bolt head. Go with someone that list the difference or call Brownell's to make sure you are getting the correct part.

[Swissfan]

RustyShackle is correct. I just received that part from Brownells and it's a short action, .473 bolt head.

[mrbuilder]

Will a .308 cartridge fit in and feed from a .223 mag?

[Robinhood]

Will a .308 cartridge fit in and feed from a .223 mag?

No it will not.

[Dave Hoback]

Your looking at the "Precision Machined Custom" bolt head. Go with the standard "Precision Machined" unit for $69.50. PTG parts are WELL WORTH the money. I used both the PTG machined billet barrel nut and .250" recoil lug, in my build. The bolt head is next.

[Damon555]

Here is exactly what you need.....

http://www.grizzly.com/products/Savage-Bolt-Head-308-SA-RH/T27333?utm_campaign=zPage

It is a quality product.....