View Full Version : Axis Blind Magazine is it possiable
brstevens
04-27-2016, 08:11 PM
Is it possible to change a Axis over to a blind magazine type ? What would have to be done and what about making the change to the magazine?
Robinhood
04-27-2016, 09:22 PM
It is possible. You would have to get a blind mag stock made or use epoxy to lock the detachable magazine in place.
brstevens
04-27-2016, 10:14 PM
It is possible. You would have to get a blind mag stock made or use epoxy to lock the detachable magazine in place.
Was thinking about having a blind stock made, but can the clip type mag. be changed over to work in a blind type stock?
Robinhood
04-27-2016, 11:59 PM
I can't say with all certainty but, many of us have blocked and epoxied magazines in place. This often includes modifying the location of the magazine. You can do it!
sharpshooter
04-28-2016, 12:14 AM
How are you going to load it through that small port????
DrThunder88
04-28-2016, 04:43 AM
Very carefully!
I could see making an Axis a single shot, but trying to load a blind magazine would be very annoying to me. I have tried loading the magazine through the ejection port. While it is doable, it was a bit more of a hassle than loading a blind magazine normally is.
Robinhood
04-28-2016, 06:20 AM
How are you going to load it through that small port????
If you build it they will come.
sharpshooter
04-28-2016, 11:05 PM
Well if I have to build it, I'd make the port bigger!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.