convert savage 110e 7mm Rem Mag to 338-06 bolt head questions

[rpjepsen]

I want to convert my savage 110e in 7mm Rem Mag to 338-06. I already have the barrel and tools needed for the barrel swap. From what I've been told, I will need to change the bolt head. The serial # shows that it is an older gun, made before 1995, so I'm assuming that my current bolt head is large firing pin (post '99 = small firing pin).

Do I need to replace firing pin or any other parts?

thank you for any help.

Rich

[olddav]

I found some info on Brownells site under product Q&A.
http://www.brownells.com/rifle-parts/bolt-parts/bolts/bolt-head-prod20652.aspx