Whipped up some OCW/load development targets.

[nhyrum]

Hey all I've been working with a few guys on 65creedmoor.com designing a target for load development.

Not sure this is the best place, but it is a picture showing my work so... Why not.

http://uploads.tapatalk-cdn.com/20160410/2648917f773bfa811505d688affe8cf9.jpg

Let me know what you guys think.

The orange is 2" the diamond is 1/4 inch with a 1/8 inch white. 12x18 paper

[LongRange]

Those are nice I like them.

[yew plucker]

Like it!

[nhyrum]

Any ideas or changes? It is designed for OCW testing

Sent from my SM-G920V using Tapatalk

[LongRange]

Bigger paper would be cool...24"x40" or so or 24"x24"? Maybe make the 2" diamond 3-4" and keep the 1/4" center but run the black lines to it.

[nhyrum]

My only issue with bigger paper is i then have to go to rolled paper, which is even harder to find in heavier stock. What I have now is essentially printed on what business cards are on. I've experimented with lighter and the image quality isn't as good and the holes aren't as clean.

I think for 100-200 yards this size should be perfect. At 200 it's 1MOA and 1/4 MOA markings

I don't want to sound like I don't care about your input. I'll run those changes by the guys that have helped decide this size and format. (one already had 300 on order when I get paper)

Sent from my SM-G920V using Tapatalk

[LongRange]

No problem...I do like the targets though they are a great idea and well thought out.

[pepper savage 111]

This is excellent! Will you be distributing these? I'm interested in having some on hand.

[nhyrum]

This is excellent! Will you be distributing these? I'm interested in having some on hand.
I do plan on it. Just have to wait to get paper in

Sent from my SM-G920V using Tapatalk

[Hotolds442]

What's the cost?

[nhyrum]

Deleted

[Hotolds442]

I kinda thought that's where this was headed.

Please read the following link:
http://www.savageshooters.com/showthread.php?132-Manufacturers-amp-Vendors-Rules

[nhyrum]

OK, got it. I wasn't sure. Honestly I asked for input to get input, not necessarily to sell them.

Sent from my SM-G920V using Tapatalk

[Hotolds442]

No problem.

FYI - I've been using freezer paper for targets, plastic on one side, paper on the other. Holds up well and stays together. About the same width as what you're using - you should be able to feed it into your printer. You get pretty good sized rolls at Costco fairly cheap.

Theres no shortage of paper rolls where I work...
http://i1276.photobucket.com/albums/y471/chevypowrd/27146D61-8A6C-4DA0-8C3B-FE7DD57921C0_zpszycslg43.jpg

[scooterf79]

I like those! Ill keep an eye on this thread to see how to get ahold of em.
Scooter

[Front Royalty]

http://i1251.photobucket.com/albums/hh560/JFoley0011981/OCW%20Target.png (http://s1251.photobucket.com/user/JFoley0011981/media/OCW%20Target.png.html)

I thought these were THE OCW target, so you're not chewing up your aiming point?

You know, aim at the center and land your group in the box?

They're free, too. You're welcome.

[nhyrum]

To each his own

Sent from my SM-G920V using Tapatalk

[jeffreybehr]

Hey all I've been working with a few guys on 65creedmoor.com designing a target for load development.

Not sure this is the best place, but it is a picture showing my work so... Why not.

...

Let me know what you guys think.

The orange is 2" the diamond is 1/4 inch with a 1/8 inch white. 12x18 paper

Care to sell me a hi-rez image of your target? Probably I'd modify/edit it somewhat and print it on 25X17" paper for my own use. E-mail me at jeffreybehr(at)cox(dot)net if you're interested.

I currently have two edited version of targets...
http://i89.photobucket.com/albums/k220/jeffreybehr/Shooting%20stuff/DotCirclesLoadDev_17wby25h_12%20bulls_1000h_zpstci rm3im.jpg (http://s89.photobucket.com/user/jeffreybehr/media/Shooting%20stuff/DotCirclesLoadDev_17wby25h_12%20bulls_1000h_zpstci rm3im.jpg.html)

...and


http://i89.photobucket.com/albums/k220/jeffreybehr/Shooting%20stuff/DotCirclesLoadDev_16wby25_1000h_zpsdgihsuyj.jpg (http://s89.photobucket.com/user/jeffreybehr/media/Shooting%20stuff/DotCirclesLoadDev_16wby25_1000h_zpsdgihsuyj.jpg.ht ml)
...that I've printed 17X25" but I've not yet shot them.