look at what came in

[savage83]

http://i1305.photobucket.com/albums/s549/heithcantrell/Mobile%20Uploads/20160405_173633_zpsgukc3l6j.jpg (http://s1305.photobucket.com/user/heithcantrell/media/Mobile%20Uploads/20160405_173633_zpsgukc3l6j.jpg.html)
http://i1305.photobucket.com/albums/s549/heithcantrell/Mobile%20Uploads/20160405_173610_zpsk6z9uigb.jpg (http://s1305.photobucket.com/user/heithcantrell/media/Mobile%20Uploads/20160405_173610_zpsk6z9uigb.jpg.html)

[LongRange]

im wondering why its not installed with 24 rounds through it LOL!!

[savage83]

Lol. Im still trying to figure out what stock to put it in. I got a 110 action. Any ideas. Say with around a 400 dollar budget?

[DrThunder88]

I leave out milk and cookies every night, hoping Santa Jim will visit my increasingly bare and lifeless tree.

I should stop eating said milk and cookies.

[LongRange]

Lol. Im still trying to figure out what stock to put it in. I got a 110 action. Any ideas. Say with around a 400 dollar budget?

step that budget up a $150 bucks and put it in a bell carlson A-5.

[savage83]

Hes having trouble with old email have you tried his new one?

[savage83]

step that budget up a $150 bucks and put it in a bell carlson A-5.

Wheres the best place to get one. And who can cerekote a barrel?

[LongRange]

just about every place has stocks in stock right now...try stockys first then just look around for the best deal...if feeding from a DB mag you will have to buy bottom metal and have the stock inlet-ed...CDI is running a special...if you buy the bottom metal from them they will inlet the stock free.

i use a local guy for paint...id look around your area for cerakote applicators.

[savage83]

just about every place has stocks in stock right now...try stockys first then just look around for the best deal...if feeding from a DB mag you will have to buy bottom metal and have the stock inlet-ed...CDI is running a special...if you buy the bottom metal from them they will inlet the stock free.

i use a local guy for paint...id look around your area for cerakote applicators.

If i put that much in a stock would i be better of going to a mtd tac 21?

[LongRange]

If going chassis you should take a close look at the XLR chassis...I like the adjustability of the XLRs.

[DrThunder88]

Hes having trouble with old email have you tried his new one?

Oh I've been in contact with him since I ordered in September. I'm just playing the waiting game.

[savage83]

Wow. What did you order.

[Front Royalty]

Wheres the best place to get one. And who can cerekote a barrel?

Where are you located?

Coatings USA here in Front Royal VA is the ONLY Cerakote Certified applicator I know of locally. They will deal through the mail.

540-636-7911 ask for Kerri.

[savage83]

Im on alabama

[Front Royalty]

Im on alabama

Shipping is pretty cheap. Tell em Foley sent you. Check them out on FB if you're a FB user, OR

http://coatingsusa.com/

[jonesturf]

I would look at a Krg or an XLR for good chassis. Also MPA makes a great chassis and will inlet for about anything. They're real popular in PRS right now. The competition stock is very nice. Not sure on price point though.

Is your action cerakoted? Wondering why you just want to do the barrel.

[DrThunder88]

Wow. What did you order.

An X-Caliber in .243 Winchester. I also have an X-Cal in .338 Edge I'm waiting for, but that one has only been two months.

[savage83]

Think im gonna sell the 6.5-284 barrel. And go a diffrent route.