New Boyds Varmint Thumbhole Stock

[Robert777]

I bought a Savage 12FV from Cabelas at a very good price but the stock was a little flimsy. I bought a Boyds varmint thumbhole stock and it fit perfect with no in-letting and the barrel is free floated. The only problems I had was that the front bolt needs to be shortened slightly and I needed a different trigger guard Savage part number 105417. I think it turned out great and is much more rigid than the original stock.

[Handi204]

Put a thin washer on the screw,

[Midnight_f150]

I'm thinking about going this route do you have a picture you can post of it?

[Fordtough]

I'm picking up my new fcv in a week or so. I've been contemplating picking up a Boyd thumb hole stock soon after I get my rifle. Can I see photos of house yours came out?

[Texas10]

I bought a Savage 12FV from Cabelas at a very good price but the stock was a little flimsy. I bought a Boyds varmint thumbhole stock and it fit perfect with no in-letting and the barrel is free floated. The only problems I had was that the front bolt needs to be shortened slightly and I needed a different trigger guard Savage part number 105417. I think it turned out great and is much more rigid than the original stock.


I don't know if it matters, but that p/n trigger guard is listed as fitting the long actions models, 110, 112. see http://www.brownells.com/rifle-parts/triggers-parts/trigger-guards/trigger-guard-metal-matte-sku855000205-12994-31323.aspx?sku=855-000-205 hole spacing might be different.

Let me know if it does fit. I need one for my model 12FV. I'm currently using a SS one that fits my M12 BVSS. Savage CS did not have an identical one in black.

[wbm]

Boyd's also sells the trigger guard.

[Texas10]

Found my paperwork on the trigger guard purchase from Savage. My p/n 105928 in SS and fitting a model 12 is the same as the one identified as fitting a model 112 on the brownells website, so the p/n 105417 you provided will likely fit. I am ordering one now to better match my FV.

Not sure why Savage CS couldn't figure that out….but thanks to your research I will finally have a matching trigger guard.

[Texas10]

Boyd's also sells the trigger guard.

I can't find one on their website. I can only find a SS guard. Can you provide a link?

[wbm]

Stainless is all I see now at Boyd's also....bought a matte blue in January so I guess stainless is all they go with now. Gunshack has them but they are a bit pricey. Midway has them too.
http://www.gunshack.com/savage-parts/savage-trigger-guards

[foxx]

Send me a stainless trigger guard and I will sandblast it and Gunkote it flat black and bake it for you. No charge. pretty much a perfect match of the factory blue.

[Texas10]

Thanks, Foxx. I think I will take you up on your generous offer if the one arriving this week is not the right one….again…..:frusty: