mbohuntr
03-01-2016, 06:35 AM
Mornin all... I recently worked up a load for my .223, using H4895 and starting from 25gr. and increasing in .2gr increments until my final step at 25.8gr . The 25.8gr proved to be the best by far at under .5". Having fount the load at near max charge... I have the following questions...
If I change brass, and the new type is at least the same H2O capacity or more, Am I good to load the same charge? I am not interested in pushing things...
If I change powder type, but not bullet weight, should I look for the same speed for the accuracy point?(obviously staying below max pressures...)
What about the type of bullet, but not weight?
Thanks all, Off to work....
If I change brass, and the new type is at least the same H2O capacity or more, Am I good to load the same charge? I am not interested in pushing things...
If I change powder type, but not bullet weight, should I look for the same speed for the accuracy point?(obviously staying below max pressures...)
What about the type of bullet, but not weight?
Thanks all, Off to work....