PDA

View Full Version : Question on Muzzle Brakes



Balljoint
07-04-2010, 11:46 AM
In the Instruction Manual that came with my new BAS/K rifle in section 7 that too close the muzzle brake twist it 1/4 turn clockwise, well it don't happen will not move any suggestions is now in the OPEN position

Balljoint
07-04-2010, 08:29 PM
Some one must know HOW

hailstone
07-05-2010, 09:55 AM
Mine only requires around 1/8 turn and its so loose that I wonder if it will remain in the same position after a shot. This was a take off barrel that I acquired. Usually I don't go for the muzzle brakes and such as there more trouble than worth but do keep evaluating.

yorketransport
07-05-2010, 10:15 AM
Have you tried cleaning/oiling the brake? Maybe it's just a little stiff. I have one of the brakes on a Striker barrel and it's very easy to turn on/off.

Andrew

pa hog
07-05-2010, 12:19 PM
The brake on the 10BAS/K is'nt an on/off brake, those instructions must be for something else.

Balljoint
07-05-2010, 12:22 PM
Thanks for the info, now i know WHY mite have to change it maybe a can