110 fcp hs scope ring question

[ironworker417]

just ordered my new 110fcp hs precision in a 300 win mag for my new long range rifle but im having trouble figuring out the ring height I need. I am using a burris xtr II 5x25x50 scope with badger ordinance 20 moa rail and badger ordinance rings I just don't know what height I will need. any help would be appreciated

[Fla_dogman]

I would guess high. I had a 3x16x44 on my 110 with Leopold 1 piece base with medium rings and it barely clears the barrel.

[Marine24]

Here is a good article:

http://www.opticstalk.com/how-to-determine-proper-ring-height_topic5946.html. The example they use is with Badger Ordnance bases and rings, although your base is closer to 8mm in height.

You will be fine with BO Medium rings (http://www.badgerordnance.com/scope-rings/30-mm-scope-ring-medium-885.html) with a little room to spare. BO standards might work but might be too low if you are running lens covers.

[WinnieTheBoom]

I had 2 setups on mine, both with a Viper PST 6-24x50mm.

1) NF 20 MOA base w/ Seekins .087" rings... left a little too much room between the bottom of the bell and top of the barrel for my liking.
2) Ken Farrel 20 MOA base w/ KF low rings... was the perfect height as far as I was concerned. Enough room to allow the caps clear the top of the barrel, but low enough to ensure a good sight picture.

Keep in mind that the KF bases are machined slightly higher than comparable bases to allow for more room around the ejection port. I suspect the low rings would be too low with a different base. For reference:

With setup #1:
http://i1111.photobucket.com/albums/h475/Garrett_Nesbitt/DSC_1389_zpskqyclkpy.jpg (http://s1111.photobucket.com/user/Garrett_Nesbitt/media/DSC_1389_zpskqyclkpy.jpg.html)

With setup #2:
http://i1111.photobucket.com/albums/h475/Garrett_Nesbitt/DSC_1449_zpsiwhdmlrv.jpg (http://s1111.photobucket.com/user/Garrett_Nesbitt/media/DSC_1449_zpsiwhdmlrv.jpg.html)

[ironworker417]

Thanks for the help guys I guess I have to call and change the order because I went with medium high and badger ordinance says there 1.25 inches