View Full Version : Boyd's Stock Question for a Savage Model 12????
patboos44
01-31-2016, 04:29 PM
I just picked up a Savage model 12 in 22-250. I was looking at getting a Boyds thumbhole stock. It's a center feed model. I'm confused if I should get the bull barrel or the factory barrel stock? It has the factory barrel on it but the factory barrel is a "bull barrel" Just don't want to order the wrong one. Thanks for any help!
adammiddagh
01-31-2016, 06:13 PM
I tend to read factory barrel as meaning sportster.
On the Boyd's sight, they should have a couple barrel channel measurements listed for reference with each stock.
From 12 tbr blind centerfeed Bull barrel.
Barrel Dimensions: Point A = 1 5/16" and Point B = 1 1/16"
From 12 tbr blind centerfeed Factory barrel.
Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4"
I would read Point B as being the barrel channel at the forearm.
patboos44
01-31-2016, 07:02 PM
So should I get a factory then? It's just a 12fvss with the factory barrel
adammiddagh
01-31-2016, 09:38 PM
Double check the stock length on Boyds.
Measure from your current recoil pad to that point on the barrel, and measure the diameter. I suspect that you need the bull barrel channel.
If you order with a bigger channel, you will have a bigger gap. If you order smaller, you will have a good amount of sanding to do.
Texas10
02-05-2016, 09:56 AM
You can save youself a bunch of work with this http://www.eabco.net/Savage-Thumbhole-Varmint-Stock-by-Revolution_p_14233.html
I just put one under a model 12FV. Drop in fit (I bedded it anyway) and comes with pillars installed and an extra action screw. Very nice stock.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.