eview326
01-23-2016, 06:25 PM
So after much research after buying a 220, I decided on Leupold scope, bases and rings.
Went with Ultimate Slam 3-9X40, dual dovetail bases and dd low rings. Everything mounted beautifully except for this here.
http://uploads.tapatalk-cdn.com/20160123/59531eb0cca2ed1987254d6c2e70093f.jpghttp://uploads.tapatalk-cdn.com/20160123/8a60f13645d2fd143adeee521e209379.jpghttp://
uploads.tapatalk-cdn.com/20160123/84db5bf8c41e153a9216d0d3ec5f98c7.jpg
This "screw" or whatever it is on the power ring won't let me turn it past 4.5X without contacting the base. As you can see I only need <1mm clearance. I don't want to go with medium rings as the cheek weld and every other aspect of the scope mount are perfect.
My plan is marking it and getting a mill file and taking a couple strokes to the base to get clearance to turn the power ring without it hanging up.
Went with Ultimate Slam 3-9X40, dual dovetail bases and dd low rings. Everything mounted beautifully except for this here.
http://uploads.tapatalk-cdn.com/20160123/59531eb0cca2ed1987254d6c2e70093f.jpghttp://uploads.tapatalk-cdn.com/20160123/8a60f13645d2fd143adeee521e209379.jpghttp://
uploads.tapatalk-cdn.com/20160123/84db5bf8c41e153a9216d0d3ec5f98c7.jpg
This "screw" or whatever it is on the power ring won't let me turn it past 4.5X without contacting the base. As you can see I only need <1mm clearance. I don't want to go with medium rings as the cheek weld and every other aspect of the scope mount are perfect.
My plan is marking it and getting a mill file and taking a couple strokes to the base to get clearance to turn the power ring without it hanging up.