Magazine question

[brianlt21]

I just bought a model 11trophy with a dbm setup it does not have bottom metal im looking on doing a caliber change the magazine i have looks like an axis setup with the plastic clip to hold it into the stock..


I have it setup now witha blind mag so i dont need the plastic clip but when i buy a new magazine could inuse one for an axis as well as as a model 10 setup and just take the bottom off

[jpdown]

There is no difference between the Savage 11 TH DBM and the Axis DBM. The SA metal magazine box and follower are the same standard SA parts. Both models use the same plastic bottom cap that snaps onto the metal magazine box with follower. Just remove the bottom cap to use in a blind magazine stock. If you are just looking for an extra metal mag box and follower for a blind magazine stock, it would be cheaper to go to www.SavageArms.com, Store tab, Partfinder tab and put in your rifle serial number and order the extra parts you need shown in the schematics.