View Full Version : Ptg mag bolt head
grouse
01-16-2016, 08:47 PM
I picked up a mag ptg bolt head. The head is shorter than the factory magnum bolt head. Is there a firing pin available for this with the shorter bolt head on the long action bolt?
sharpshooter
01-16-2016, 11:34 PM
You have the wrong bolt head.
Robinhood
01-16-2016, 11:43 PM
Does PTG make the .625 long WSM bolthead?
grouse
01-18-2016, 12:11 AM
The bolt head I have is the same length as a standard bolt head. The retaining pin hole is in the correct spot, but the head is too short.
Swissfan
01-26-2016, 10:27 AM
Grouse, PTG does make a bolt head w/.473" face for the longer firing pin. I have one that I purchased from Grizzly, the lugs are longer.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.