Ptg mag bolt head

[grouse]

I picked up a mag ptg bolt head. The head is shorter than the factory magnum bolt head. Is there a firing pin available for this with the shorter bolt head on the long action bolt?

[sharpshooter]

You have the wrong bolt head.

[Robinhood]

Does PTG make the .625 long WSM bolthead?

[grouse]

The bolt head I have is the same length as a standard bolt head. The retaining pin hole is in the correct spot, but the head is too short.

[Swissfan]

Grouse, PTG does make a bolt head w/.473" face for the longer firing pin. I have one that I purchased from Grizzly, the lugs are longer.