View Full Version : .243 win rechamber
brianlt21
12-29-2015, 02:31 PM
I have a factory sporter .243 win barrel laying around thinking of a new project for winter time wondering what caliber to recahmber this barrel to want somebing that i could hunt varmints and such with but must be a repeater out of short action..n thinking also cutting the barrel to 18"
LongRange
12-29-2015, 05:53 PM
are you doing the chambering yourself? if not id suggest you pick a caliber and look at the prefit barrels as your going to pay close to the same price if you have it re-chambered,shortened and crowned.
stomp442
12-29-2015, 06:58 PM
What's wrong with the .243? Is there enough tennon to rechamber to anything else on a factory barrel? What is there to gain by re-chambering to something else and cutting to 18" rather than just cutting the .243 to 18"?
yobuck
12-29-2015, 07:19 PM
What's wrong with the .243? Is there enough tennon to rechamber to anything else on a factory barrel? What is there to gain by re-chambering to something else and cutting to 18" rather than just cutting the .243 to 18"?
Im not one to ask overload questions. So i would stop with the first one.
brianlt21
12-29-2015, 07:51 PM
I would be doing the cutting and crowning but not chambering
There is enough room tennon room also not sure thats what im asking just wanted something different
GaCop
12-30-2015, 04:20 PM
Quickest rechamber would be 243AI......
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.