View Full Version : Considerations for Scope Rails on Target Actions
DrThunder88
12-25-2015, 11:02 PM
Are there any special considerations when putting a rail on a target action or other closed top receiver to handle the recoil of larger cartridges? I know some rails are machined in such a way as to interface with the ejection port and act as a sort of recoil lug but doubt that would work with a smooth top receiver. I have found mixed opinions on upgrading to 8-40 screws.
olddav
12-26-2015, 03:29 PM
How about bedding the base and us the 6-48 screws.
Balljoint
12-26-2015, 06:02 PM
Have an EGW base on my target action #80312 20deg with 3 inch extension for prone shooting.
swadiver
01-02-2016, 06:26 AM
i have one of these:
https://www.murphyprecision.com/Products/Item/1002
beautiful product, stainless steel, i did not need to bed it on my target action
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.