Limbsaver for Boyd's Stock

[WinnieTheBoom]

Anyone have any idea which Limbsaver recoil pad # will fit the Boyd's stocks? I've done the old "try to match the factory one up with one from Cabela's" and have failed 3 times. It always seems to be off by a fraction of an inch on the sides or at the bottom... Just getting annoyed trying to find a prefit one at this point, so before I go back and get an oversized one to sand down, does anyone have any idea if there's one that fits?

For reference, you can see at the bottom where the stock is just a bit longer and there's enough space protruding to make it annoying.

http://i1111.photobucket.com/albums/h475/Garrett_Nesbitt/stock_zpsu7sldosc.jpg (http://s1111.photobucket.com/user/Garrett_Nesbitt/media/stock_zpsu7sldosc.jpg.html)

[Londerko]

It's a $17 add on when you order a Boyd's stock. You obviously already have a stock, but they mite send you one if you call. I won't order a Boyd's without one anymore.

[WinnieTheBoom]

Thanks. Will give them a call to see if they can help me out.