Aftermarket sporter stock help for 111

[Erik707]

I have a 111 rifle and I want to upgrade the stock.
It is a LA, dbm centerfeed, and has a top bolt release. I really wanted a B&C medalist but it doesn't look like they make a stock for my rifle.
Does anyone have any other stock suggestions? Can I modify my rifle somehow to make a B&C work?

[pepper savage 111]

Like this?


https://www.stockysstocks.com/bell-carlson-medalist-classic-checkered-riflestocks-remington-700-savage-110-mauser-96-98-browning-a-bolt-winchester-70-sa-wsm-weatherby-mk-v-with-aluminum-bedding.html

[Erik707]

I believe that one is for sf's.
I talked to B&C and also Stocky's about this stock:
https://www.stockysstocks.com/bell-carlson-savage-110-116-sporter-medalist.html
Stocky says this is the stock i want but B&C says that it only works for staggerfeeds.
Anyone know if this will work for me?

[devildogandboy]

I believe that one is for sf's.
I talked to B&C and also Stocky's about this stock:
https://www.stockysstocks.com/bell-carlson-savage-110-116-sporter-medalist.html
Stocky says this is the stock i want but B&C says that it only works for staggerfeeds.
Anyone know if this will work for me?

look in the drop down for "CHECK AVAILABILITY" they have them for bottom and top bolt release dbm's. get the one for top bolt release in your color.

Bruce

[Inebriated]

I converted B&C's staggerfeed/LA/top release for a centerfeed/LA/top release, thread here (http://www.savageshooters.com/showthread.php?46150-Centerfeed-action-in-a-staggerfeed-stock-issues-(Medalist)).

Basically used an end mill in a drill press to hog out the material on the rear "pillar" for the L-clip, and I still need to do a permanent mag body fit... The CF mag body is just a little narrower and a little shorter than the SF, so you need to build up around it. Works fine, though.