View Full Version : Boyd Pro Varmit stock question
acarv
12-10-2015, 10:04 PM
Will be acquiring a savage axis in .223 this weekend and would like to know what I need in addition to the stock to install the action?
Shouldn't need anything. Maybe a longer set of screws. Might ask if you can get a metal trigger guard as an option.
DrThunder88
12-11-2015, 07:47 AM
Boyds has a good price on metal trigger guards. It's usually best to get one when you order the stock.
I've never had problems with the factory action screws being too short, but I know at least a few other people have, especially the front action screw. If you plan on installing pillars, the factory screws will probably be fine.
doodedge
12-12-2015, 04:21 PM
+1 on the metal trigger guard. Comes with a plastic one. The front hole sits under the rear action bolt and with any amount of torque on the rear action bolt it will crack and break.
devildogandboy
12-12-2015, 09:16 PM
+2 on the metal trigger guard! big improvement over the plastic and not that much($14).
Bruce
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.