Savage Accustock Trigger Guard

[bayou boy]

I have a savage accustock trigger guard screw stripped on the stock. Any recommendation on how to repair this.

[tom in michigan]

If it is a synthetic stock with the wood screw at the rear of the trigger guard, you can drill the hole out, fill it with epoxy. After the epoxy dries, re-drill the hole to the proper size for the screw. Then reinstall the screw.

[bayou boy]

Yes it's synthetic will I need to remove the barrel from the stock?

[tom in michigan]

You could probably do it with stock installed, but it would be easier if you remove the stock from the rifle.

[bayou boy]

Thanks for the info