PDA

View Full Version : Long Action Centerfeed using Short Action Mags



frazer
06-15-2010, 11:59 AM
Ok so I have a hypotheical situation that I am curious if anyone else has tried or thought of.

I want to have a multi caliber switch barrel system and use a long action centerfeed rifle so I can shoot both short and long action calibers.
I want to ba able to feed short action calibers from a magazine reliably so for that reason I think using a short action mag would be best.
The question is:
since the 220F savage Slug gun uses a long action bottom metal but is inletted for short action mags, could you use a bottom metal from a 220f in a regular long action rifle(110) and would it feed cartridges from the short action centerfeed mag?

jpdown
06-15-2010, 02:39 PM
I've had no problems with reliable feeding in a Savage LA centerfeed using .243, .260, .308 or and .338-06 barrels. But this is with a blind magazine stock. With a blind magazine centerfeed stock you could make an extended L-clip and attach to a SA magazine. But I did not like the L-clip and removed it. I then used plumber epoxy on the bottom corners of the magazine and Velcro on the side to properly position the magazine in the stock. Place a spacer (business card) between the bolt and magazine and tape in proper position to action. Put a small ball of plumber epoxy on each corner of the magazine and then attach stock to action. This will form place holders in the stock for the SA and LA magazines. Add Velcro to the sides to help hold firmly in place, but still allow removal. I don't see why you could not position a SA magazine and LA magazine to use interchangeable in the same LA centerfeed stock.

I'm not sure you would have as much flexability with a DBM and HFP stock.

sharpshooter
06-16-2010, 02:03 AM
Ok so I have a hypotheical situation that I am curious if anyone else has tried or thought of.

I want to have a multi caliber switch barrel system and use a long action centerfeed rifle so I can shoot both short and long action calibers.
I want to ba able to feed short action calibers from a magazine reliably so for that reason I think using a short action mag would be best.
The question is:
since the 220F savage Slug gun uses a long action bottom metal but is inletted for short action mags, could you use a bottom metal from a 220f in a regular long action rifle(110) and would it feed cartridges from the short action centerfeed mag?

No....it is completely different.

rickt300
06-16-2010, 11:14 AM
Where can I get a short action magazine for a centerfeed stock? Cost?

jpdown
06-16-2010, 01:43 PM
If you currently have a SA centerfeed DBM or a HFP magazine, you can just remove the magazine from the bottom hardware and use (Same part used as blind magazine). Contact Savage Arms or Sharp Shooters Supply and purchase one. Or go to on-line and buy an extra DBM for a Savage SA centerfeed and just remove the bottom plate.

lostart
06-16-2010, 08:26 PM
Can you really fit a short action dbm into a long action stock? That would be really convenient.

sharpshooter
06-16-2010, 09:00 PM
Has anybody bothered to read this?http://savageshooters.com/index.php?articleview=Magazine%20Conversions

lostart
06-16-2010, 09:13 PM
Fred,

I have read that article several times and now again. And a good article it is, but it doesn't say if a short mag will fit in LA stock.

frazer
06-21-2010, 02:08 PM
Yes, I too had read the magazine conversion article. I read the article about the 220F SlugGun and saw the picture of the 220F, model 110, and model 10 detachable bottom metal all lined up side by side and wondered if the 220F bottom metal would work in a model 110 so you could use short action mags for the smaller cartridges. Sounds like it wont work anyway, but my curoisity got the best of me and I had to ask.