PDA

View Full Version : Mark I/II/93R: Savage Mark II G - windage adjustment?



sealaw
11-18-2015, 08:24 AM
OK - just took my new Savage Mk II G to the local range for a break-in session yesterday. Started at 25 yds...shooting nice 6" groups with open sights...same at 50 yds. Elevation was close enough.

Only one problem...the groups are a good 4"-6" to the right of my POA at 50 yds. (I was shooting from a bench rest).

There is no immediately obvious way to adjust the sights for windage...the front sight appears to be one solid piece welded to the barrel, no dovetail to allow "drifting" to left or right. Am I missing something?

Ultimately I will be putting a scope on this one so the issue is not a "deal-breaker" but I would like to get her zeroed on the open sights before I mount the scope.

Any suggestions? Thanks in advance.

MidwesternMutt
11-18-2015, 01:10 PM
My G has a rear sight in the barrel. I have had the sight out and reinstalled, so it can move a bit. Tap gently!

sealaw
11-19-2015, 07:42 PM
Thanks for the reply MM - I wouldn't have looked more closely at the rear sight without your suggestion. That seems to do the trick. Now have an excuse for another trip to the range!

MidwesternMutt
11-19-2015, 08:08 PM
There is nothing like a little range time to improve the mood! Glad to help.