View Full Version : Early 110 breech cuts?
Jeff518
11-11-2015, 11:37 AM
Does anyone have a photo of the barrel breech cuts from an early 110 with the extended bolt nose?
Thanks,
Jeff
sharpshooter
11-11-2015, 07:47 PM
No photo's but here are the dimensions: The counter bore diameter =.800" x .260 deep. Thread length is 1.500". The headspace gauge should be .111 below the end of the breech.
Jeff518
11-12-2015, 09:16 PM
Thank You Sharpshooter, much appreciated.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.