11-VT stock replacement

[matt.tdavis76]

Hello, I just purchased a 11-VT 308 and having trouble finding current information on this model. From what I find there is something odd about this model and there will be some things I need to change to replace the stock. Any help from anyone who has this and done it would be greatly appreciated.

[DrThunder88]

I think the only thing unusual about them is that they are a Dick's-exclusive model. Otherwise it's a pretty straight forward 11 with Axis-type magazines.

[kwood94xj]

The 11 VT is a standard Model 11 with a heavy barrel and a Axis magazine system. if the mag frame part (the part the mag goes into) is removable from the stock er stock then all you need to do is order a new stock with a heavy barrel contor or be prepard to manually sand the channel out to fit your barrel. if it is molded into the stock stock then you will need to purchase

Trigger Guard- 107217
Frame Assy- 106705
Magazine- 55105

These parts would convert it to use the standard bottom metal with the catch on the frame not the axis style mag.

hope this helps

[patnemo]

Thanks for the part numbers, i am in the same boat as i just picked up the same rifle last Friday. Cost is 156.00 for all (3). It may make more sense to go with aftermarket metal to accommodate AICS mags. Although the bottom bolt release may be an issue.
Pat

[MasterOfPupets]

Both pt&g and cdi make their bottom metal for a bottom bolt release. Just make sure you order the right one.