View Full Version : Savage 99: Help with reassemble
bushrat
10-27-2015, 04:30 PM
I completely disassembled a 99H which was gifted to me, and the project was side tracked by a trip out of state. I reassrmbled it from memory but I have a tiny coil spring left over. The spring is a little less that a half inch long and maybe a sixteeth in diameter. Can anyone tell me where it goes? I have found exploded diagrams but they are not enough help. I might be too dumb to own 99 so I might have to sell them off.
Robinhood
10-27-2015, 11:02 PM
It is not the one that goes behind the automatic cutoff is it?
bushrat
10-27-2015, 11:51 PM
I will check the diagram and see what I can come up with.
Thanks much
bushrat
10-28-2015, 12:00 AM
I will check the diagram and see what I can come up with.
Thanks much
I checked and while it looks right my rifle has the old style.
bushrat
10-28-2015, 01:25 AM
It is not the cut off spring as my rifle has the old style, I think it is the second hammer indicated spring but can not tell how to put it back.
Old No7
10-28-2015, 08:41 AM
Is it the "Hammer Indicator Spring" that fits between the top of the receiver and the Hammer Indicator?
Try cycling and firing the action (with a once-fired shell or snap cap) and watch the indicator, to see if it's working right.
I can see where that small part might get missed, yet everything else would "seem to function OK".
Hope this helps.
Old No7
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.