One piece scope base

[bobcat30]

Since as of now i wont be shooting 600 or 1000 yard comp or plinking. But was wondering what the best one piece scope base a guy can get at a affordable price and which rings? Going on a 110 long action.

[drybean]

egw base &burris rings

[bythebook]

egw base &burris rings



+1 on that

[tammons]

EGW is good for the $.

Farris is very good, but the last one I got was not true picatinny as the slots were slighly narrow.
Still superb. The only rings I had that would not fit were IOR Rings.

TPS bases are very good and expensive, but I returned two for an exchange and never got a base, return call or anything.
They were gone.

I like Burris Extreme rings. Super heavy duty.

[bobcat30]

where is a good place to get egw bases? And as far as burris rings how are the sig zee rings?

[viper9696]

right to the horses mouth
http://egw-guns.com/store/index.php?main_page=index&cPath=39&zenid=2e073d998edc0ea9550839f713681025


and for sure get the SIG ZEE rings or the Extreme but I perfer the SIG ZEE because of the adj inserts.

[bobcat30]

Ok so i decided on the egw 0moa one piece base and burris extreme tactical 1inch rings, now i need to decide on ring height i will be mounting a nikon 6x24x50 monarch what height do i need to clear the objective to the barrel ? thought i read somewhere on here because the egw base is taller i could maybe get away with a shorter ring eight. So would mediums work then?

[tammons]

They shoud fit but it might be tight. Medium XTR are 1/2"

http://www.midwayusa.com/midwayusa/staticpages/charts/ring_height.htm

[bobcat30]

well i have high rings on standard weaver bases and actually the scope sits a bit to high so thats why i thought the medium would work wish there was a local shop that had them so i could check it out

[rjtfroggy]

Medium XTR rings will fit fine.

[desertcj]

I got a 10moa stainless base for my .243 from these guys http://www.murphyprecision.com/

It's pretty nice IMO

[bobcat30]

If they had it for a long action available

[jwpark]

Which do you guys prefer, the regular EGW 1 piece base for the F Class EGW 1 piece base?

Jay

[desertcj]

If they had it for a long action available


Give them a call, maybe they do and they don't have it on the website. They will do custom bases so ???

[bobcat30]

Sounds like its worth a shot.Thanks

[hillcharger5]

Bobcat 30, have you looked at Bench Source mounts. I have 2 Mod. 12's with these mounts and they are excellent. Also the Bench Source people provide excellent technical support.

[bobcat30]

no i havent yet but will. I already ordered the egw bases tho

[McKinneyMike]

Bobcat 30, have you looked at Bench Source mounts. I have 2 Mod. 12's with these mounts and they are excellent. Also the Bench Source people provide excellent technical support.


The Bench Source bases look quite tall in the photos compared to most picatinny bases. Are they?