M308

[Jfrano]

So I have a 308 model 11. I upgraded the Nikon scope to the Nikon M308 4-16. Using the original rails doesn't seem the scope has sufficient adjustment to zero scope with laser sight. Is there any adjustment that can be made in the rails?
Thanks

[pitsnipe]

Jfrano,

What lack of adjustment do you have? Windage and/or elevation? I assume you have individual bases on the receiver. They are what they are short of bedding them for height alignment. Whereas a solid one piece picatinny rail (bedded if needed since some receivers have a height difference front to back) would be much easier.



Snipe

[Robinhood]

Did you change rings also?
Have you shot this rifle before?
That scope is of known quality.

[olddav]

Nikon's web site says it has a built in 20 MOA slope.
What base are you using?

[Jfrano]

The elevation. I can't get cross hair into laser
Point, crosshairs are low

[Jfrano]

--No stock savage rings.
--Had the rifle for a year and have shoot many rounds.
--purchased m308 from Optics Planet

[Robinhood]

Shoot target at 25 yards Adjust elevation(will be 4 to 1) Stop when you are 1.5 low. move to 50 then 100.