Model 110--Side release--7mm mag.

[swampcrawler]

Need to know if a "side release" can be modified to a "blind feed". Can't find a replacement stock for a side release. Very nice rifle, but previous owner said the stock had been "split and repaired". I really don't want this thing to come un-wrapped when I touch it off. He has never shot it since repair. Suggestions!!!

[wbm]

Had one of the long action Weather Warriors in a side release. I had the same problem. I called Savage and they said that the standard long action magazine box would not work. So if you want a magazine box it will have to be modified. I just made a single action out of it.

[Blue Avenger]

factory used the same mag holder for blind feed, with an open bottom clip and a solid floor plate. Not sure if you could mod your clip.

Now that you reminded me I will go look for a stock for you at a semi local shop I for get about.

[rjtfroggy]

Swampcrawler if it is an older model then yes it can be done. I just converted a 243 to blind mag using standard stagger feed mag and follower.When you take it apart there is a magazine shell(for lack of better term) that is attached to the action. You need to take this off and then put the blind mag in it's place,it takes a little patience to do it.Once everything is in place just put the actioned barrel into a new stock and you are good to go.
Parts needed; magazine and a follower.
If it is a newer centerfeed then you will need the magazine the follower and the "L" bracket to hold in place.
If you search for a picture post of mine you will find a "applejack"(red/black) stocked rifle that used to be a side button released magazine and is now a blind mag.
All the parts are available from Savage 1 800 370-0708 or Midway and quite possibly SSS.

[Blue Avenger]

here is one! think it was $95- I lost the number in my mind and am guessing
http://img.photobucket.com/albums/v675/gcidso123/img1275771124084.jpg
Walnut!
http://img.photobucket.com/albums/v675/gcidso123/img1275771125183.jpg

http://img.photobucket.com/albums/v675/gcidso123/img1275771512733.jpg

few choices
http://img.photobucket.com/albums/v675/gcidso123/img1275771266709.jpg

some used barrels
http://img.photobucket.com/albums/v675/gcidso123/img1275771513587.jpg

http://img.photobucket.com/albums/v675/gcidso123/img1275771267898.jpg
M1 Gurand in 300 WM! all I got was the pic, cowboy shooters filled the place and I did not have $1500 to play with. :(

[Blue Avenger]

right click and view img to enlarge.
http://img.photobucket.com/albums/v675/gcidso123/savage/savageclipfeed.jpg
http://img.photobucket.com/albums/v675/gcidso123/savage/img1265766503880.jpg

[pdog06]

What did ya buy Greg>>>LOL I see something under your arm in the reflection... Looks like a soft case maybe...

Those 2 pics of the stocks and barrels is how I picture Hammers gun room for all his spare parts...LOL

[Blue Avenger]

http://img.photobucket.com/albums/v675/gcidso123/emocons/mike.gif I found a left hand stock just like the right hand one in the pictures. Had to pay $75 for the obsoleate piece of wood http://img.photobucket.com/albums/v675/gcidso123/emocons/thcid_82FF7BEFA96A4659A63DEEC53FCE0.gif

[placek59]

I don't want to steal the thread here but.... Bl Av - where is this place and do they have a website? !

[Blue Avenger]

wondered how long before some one asked. LOL

AHLMAN'S
9525 west 230th St
Morristown, MN 55052

507-685-4244

Cap Alhman started the store and the kids run it now. no web site that I know of.






Need to know if a "side release" can be modified to a "blind feed". Can't find a replacement stock for a side release. Very nice rifle, but previous owner said the stock had been "split and repaired". I really don't want this thing to come un-wrapped when I touch it off. He has never shot it since repair. Suggestions!!!


I can tell you where in the store to send a clerk if you want to talk to them about the stock.

[Blue Avenger]

there is a new looking if not new .375 H&H there also around $700-

[Blue Avenger]

I don't want to steal the thread here but.... Bl Av - where is this place and do they have a website? !


http://www.ahlmans.com/index.html