PDA

View Full Version : new barrel for the creedmoor



acemisser
08-27-2015, 03:12 PM
will be in need of another barrel by spring,I think..
Been thinking of going with a 22 inch bull barrel.
I realize there may be some MV lost..But the barrel
harmonics might be easier to tame than 26 or 28..

Any comment or suggestions..thanks..:o

darkker
08-27-2015, 05:46 PM
I suppose it depends on what cartridge and loads.
Never had an issue with running into harmonic issues with my various length cartridges; at least none that couldn't be adjusted by load work.

homefrontsniper
08-27-2015, 11:26 PM
Like ^

LoneWolf
08-28-2015, 07:40 AM
will be in need of another barrel by spring,I think..
Been thinking of going with a 22 inch bull barrel.
I realize there may be some MV lost..But the barrel
harmonics might be easier to tame than 26 or 28..

Any comment or suggestions..thanks..:o
What bullet, powder, primer are you shooting. How far off the lands? Show some pictures of groups. If your only target shooting I know a lot of guys that prefer the 139gr Scenar due to its jump insensitivity. H4350 is their go to.

scope eye
08-28-2015, 08:46 AM
No matter what case I load from 22cal through 338 and then some, every one that I have loaded with H4350, I have had better results with RL17 fps, grouping, ect.

Dean