View Full Version : Can someone run a load for me, 338 Win Mag fun.
Toyoda
08-26-2015, 10:51 PM
My current load is 75gr or RL19 under a 225gr accubond. I had some nice results, and I don't have any pressure signs on the brass. I want to try and go hotter, but I am already over Nosler's max of 74 gr or RL19.
Can I safely go up a grain (in .2 gr incriments)?
Jamie
08-26-2015, 11:48 PM
I need the COAL and the case length. With generic input data you are at 70.5k. The more accurate the input, the more accurate the output.
Either way, I would not go up.
Toyoda
08-27-2015, 10:00 PM
Empty case is 2.5" and my coal is 2.6675.
Jamie
08-28-2015, 11:16 AM
Guessing you meant 3.6675. Quickload has that at 53K, your COAL will make huge changes in pressure so keep it the same.
*Neither Quickload nor I can guarantee the accuracy of this information. use at your own risk.*
Toyoda
08-28-2015, 02:50 PM
Oops.
I understand quickly ad is just an educated guess.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.