Model 12BVSS - Top Load - Removal of the mag

[TnTom]

I've removed the barrel and action and wish to slip the mag out but it's feeling a little stubborn. Should it pull straight up?

Also while I'm at it I wish to remove the trigger assembly. If there just the single pin that appears to slip out left to right? Thanks Tom

[possum1]

Don't know about the trigger, the mag box is simple. I took flat screwdriver and pried each end up slowly, get's up so far and pop's out.

[TnTom]

Thanks Possum I did a detailed search and found the same method you described. Thanks for the quick response. The trigger is as I thought.