PDA

View Full Version : 110 Savage blueprints?


Tjscharp
07-19-2015, 02:41 AM
I am looking for for access to some savage 110 blueprints. I am starting on a project to design and hopefully make my own aluminum chassis style stock. I'd rather not have to pull out the calipers and micrometers if at all possible.
bsekf
07-21-2015, 12:02 PM
Sounds like an interesting project. I have thought of making a piece of aluminum channel that the action would lay in and would snug up against the recoil lug. Attach to the stock firmly, with screws and epoxy. Would negate the magazine, but I shoot mostly single shot anyway. The savage action is the same diameter at each end, isn't it? Just machine the correct radius and either elongate the holes or make the length very accurate so the bedding block fits tight against the recoil lug.

Another thought is to build a barrel block that attaches to the stock and free floats the barrel and action. Would require careful machining to match the barrel to the block. There is a guy in Canada who has done this for a F-class rifle. Search for 260 Mystic.

Good luck and keep us posted.

Bill
FW Conch
07-21-2015, 02:39 PM
^ Whidden "V" Block ? ... whiddengunworks.com ^

Barrel blocks are somewhat common in competition shooting, have been around quite a while. :-)
BillPa
07-21-2015, 03:17 PM
Another thought is to build a barrel block that attaches to the stock and free floats the barrel and action. Would require careful machining to match the barrel to the block. There is a guy in Canada who has done this for a F-class rifle. Search for 260 Mystic.


Bill

Ya mean like this.....
http://i38.tinypic.com/rr0exf.jpg

That was my first 1K gun, circa '84-'85.

Bill
Rosco
07-21-2015, 03:34 PM
What scope were you using? Little before my time.
Heavyweight
07-21-2015, 06:18 PM
That Sir is a genuine Unertl. Best scopes ever made IMHO. See how the elevation control is mechanical and outside of the scope body? Allows almost unlimited elevation control. Best long range rigs ever!

Heavyweight
BillPa
07-21-2015, 08:44 PM
That Sir is a genuine Unertl.

Heavyweight


Yep, a 24x 2" target. I don't have the rifle or scope any longer. I sold the package( Rifle,scope, dies, brass, etc) to a friend when I gave up LR.

Bill
bsekf
07-21-2015, 09:19 PM
BillPa,

How did it shoot? How much extra weight did it add?

Bill
BillPa
07-21-2015, 10:34 PM
BillPa,

How did it shoot? How much extra weight did it add?

Bill

It shot pretty good, can't say the same for the driver though! :p I can't say what that block rectangular one weighed, but second 3" round one I made was something like 8-9 pounds. I never ago around using that one.

Blocked guns were kind of a flash in the pan. They really didn't do any better accuracy wise than a bedded stock or a glue in.

Bill