Eabco accuracy barrel review

[bythebook]

That is very good I have a 28 inch McGowen in 6br and 2 years ago I won a 750 yd match and just missed winning a 1050 yd match. I don,t know if I could do it again now my eyes are starting to go.

[DanSavage]

That is very good I have a 28 inch McGowen in 6br and 2 years ago I won a 750 yd match and just missed winning a 1050 yd match. I don,t know if I could do it again now my eyes are starting to go.

It only took 29and3/4 MOA to get there,, bullet running 2820fps at altitude of 1200. Was easily able to get right back on target and see the hit's.

[DanSavage]

http://i1283.photobucket.com/albums/a542/243Wilson/F-Class%20193_zpsdgxyzx9l.jpg (http://s1283.photobucket.com/user/243Wilson/media/F-Class%20193_zpsdgxyzx9l.jpg.html)

[acemisser]

thats awesome Dan....Good shooting.....Gota say,i'm not really to pleased with my shaw barrel in 6.5 creedmoor or maybe i just havent
found the right combination yet...Did several ocw test as well as oal test..Shoots in hole at 100 yards but out to 300 it looks like a scatter
gun..Just cant putmy finger on it....

[DanSavage]

thats awesome Dan....Good shooting.....Gota say,i'm not really to pleased with my shaw barrel in 6.5 creedmoor or maybe i just havent
found the right combination yet...Did several ocw test as well as oal test..Shoots in hole at 100 yards but out to 300 it looks like a scatter
gun..Just cant putmy finger on it....

Thanks Ace,, have a lot of problems getting on this site,, but I'll see you tomorrow.

[DanSavage]

I have now shot 5 clean 200,,or 400 match's with this barrel with the Hornady 105 HPBT's at 300 yards with X counts ranging from 25 to 33. One match that was at 185 yrds I dropped 5 points,, I was trying an old box of Curry bullets that were 70 grain's. They coppered the snot out of the barrel and I'm throwing the rest of them in the scrap pile. Hornady's 105's even with the long bearing surface hardly copper the barrel after 50 rounds.

When I initially tested 10 of the 70 grain curry bullets, I bumped up the Varget charge to 32 grain's. and at the same time ran some old Remington small rifle primer's. When I was done shooting I noticed the heads of the cases looked a little dark. I looked closer and found pierced primer's on 6 of them for the first time ever in my career. THE gases ruined the firing pin tip cutting it up pretty bad. I've always knew it had .060 protrution. I took pin out re-radiused it and set protrution at .038.

[RatMag]

Dang nice shootin Dan!! Those X counts are impressive!!

DK

[DanSavage]

Dang nice shootin Dan!! Those X counts are impressive!!

DK


Thanks Ratmag,,

This is one of my favorite shots. A cold bore at 300 yards.

http://i1283.photobucket.com/albums/a542/243Wilson/F-Class%20201_zps4bkosege.jpg (http://s1283.photobucket.com/user/243Wilson/media/F-Class%20201_zps4bkosege.jpg.html)

[scooterf79]

Oh yeah! Gotta love that!
Scooter