View Full Version : stagger-feed into centerfeed
devildogandboy
06-13-2015, 06:53 PM
hey all, i have not done this and i am curious as to whether a LA stagger-feed action can be fitted into an LA centerfeed blind mag stock. if so, how much work is involved?
thanks for any help.
Bruce
Its no big deal. Just have to be sure there is enough wiggle room all around the sf box mag. Unlike the CF, it should not be tight. You might have to put some epoxy in bottom of the well so the spring can push up the follower properly.
Hotolds442
06-13-2015, 07:38 PM
About 5 minutes with a Dremel is all it takes.
devildogandboy
06-13-2015, 10:30 PM
that's what i was thinking but not really sure. thanks foxx and Hotolds for the input!
Bruce
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.