stagger-feed into centerfeed

[devildogandboy]

hey all, i have not done this and i am curious as to whether a LA stagger-feed action can be fitted into an LA centerfeed blind mag stock. if so, how much work is involved?
thanks for any help.

Bruce

[foxx]

Its no big deal. Just have to be sure there is enough wiggle room all around the sf box mag. Unlike the CF, it should not be tight. You might have to put some epoxy in bottom of the well so the spring can push up the follower properly.

[Hotolds442]

About 5 minutes with a Dremel is all it takes.

[devildogandboy]

that's what i was thinking but not really sure. thanks foxx and Hotolds for the input!

Bruce