View Full Version : Factory WSM barrel & part weights
Tarheelpwr
05-30-2015, 05:26 AM
I'm trying to figure out some weights for a LW build. Does anyone have/know weights on the following:
WSM large shank action
Blind mag/box/etc
Large shank nut
Precision Ground lug
24" WSM barrel (300 ideally, others will get me close enough)
Factory stock with mag from a 16 TH
Nikon Package scope from a 16 TH (and rings/bases if possible)
thanks!
458MinMag
05-30-2015, 04:44 PM
These were weighed on a Harbor Freight scale, so I would take them as approximate weights...
Model11 WSM round back, large shank action with complete bolt, accu-trigger and screws (no mag box): 834g
24in 300WSM factory barrel with plastic sights: 1189g
Mag box, follower and spring: 55g
NSS LS recoil lug: 27g
NSS LS barrel nut: 22g
I had a DNZ, flat back, short action, low, one piece base/rings that I weighed for reference: 90g
Good luck with your project
Jeff
Tarheelpwr
05-30-2015, 04:48 PM
These were weighed on a Harbor Freight scale, so I would take them as approximate weights...
Model11 WSM round back, large shank action with complete bolt, accu-trigger and screws (no mag box): 834g
24in 300WSM factory barrel with plastic sights: 1189g
Mag box, follower and spring: 55g
NSS LS recoil lug: 27g
NSS LS barrel nut: 22g
I had a DNZ, flat back, short action, low, one piece base/rings that I weighed for reference: 90g
Good luck with your project
Jeff
Perfect, I appreciate you getting those for me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.