bolt head Question

[Baryngyl]

Does the magnum bolt head take a different Extractor?
I am looking at getting the below bolt head,
http://www.midwayusa.com/viewProduct/?productnumber=378112 and need to know if this Extractor will work on it http://www.midwayusa.com/viewProduct/?productnumber=107108


Thank You
Michael Grace

[Baryngyl]

Found out what I needed to know.
Just thought I would add a bit of info here in case someone else is looking for the same info.
In the thread: "Difference in extractor from .378 to .473 Bolt head?" (http://savageshooters.com/SavageForum/index.php/topic,33254.0.html) rbeckwith says:


I just got off the phone with Savage and they are telling me that there is one extractor for the .223/.204 bolt head and then they have thier standard size extractor that fits everything else. She gave me a part number of 100139 for the standard bolt head for a RBLP action. She then said they have a 10 dollar minimum and that I could not order just that extractor from them because it did not cost enough. She suggested I order more than one...but I do not need more than one.

Michael Grace

[Blue Avenger]

but having spare springs and balls is handy when you launch a set.

[Baryngyl]

Stick all parts inside a 1 gallon ziplock bag and close it then put them together, should keep you from losing any parts.


Michael Grace