PDA

View Full Version : Another 10BA question.


kwood94xj
05-11-2015, 09:03 AM
Ok I have a model 11VT from dicks. I am looking for options to convert it to ACIS or other 10rd mag system. I have read the the 10BA mags are basically a ACIS type. My questions are.

With the 10BA Bottom Metal/Stock plate fit my 11VT with minimal fitting?
Does anyone have the part# for the bottom plate from the 10BA?
jsmith
05-11-2015, 09:33 AM
This is what I got for my 11TH (which I think is the same BM as the VT) in .223 w/ bottom bolt release:

trigger guard assembly (item #107217)
metal frame assembly (item #106705)
metal magazine bottom cap (item #106245)

This in NOT for the extended magazine though so I'm not sure if this info helps you.
kwood94xj
05-11-2015, 12:05 PM
Thank You jsmith. This helps if I cannot use the 10BA frame. Either way it is good information.
kwood94xj
05-13-2015, 12:17 PM
Ok since no one has the info I am after on the top ho their head can someone who owns a 10BA please either go on savages site and enter their serial # and get the part number for the mag well frame or PM me a serial Number and i will look it up.
LongRange
05-13-2015, 03:32 PM
savage dont make there own mags they use AICS mags....the BA style riffle dont have bottom metal the mag inlet is in the aluminium stock.
try AICS they probable have what your looking for.

http://accurate-mag.com/magazines/
kwood94xj
05-14-2015, 10:33 AM
Ahh that makes sense. No bottom metal. I know there is aftermarket options but 200+ for such a cheap part to manufacture is a rip off. I may just get a mag and machine one myself.
LongRange
05-14-2015, 11:02 AM
im trying to put a mag together for my 110BA...i just rebarreled from 300wm to 260rem...the mag holds the case and will feed one at a time fine so i think i just need to put a 308 follower and spring in the 300 mag and put a spacer in the back.
kwood94xj
05-14-2015, 11:30 AM
im trying to put a mag together for my 110BA...i just rebarreled from 300wm to 260rem...the mag holds the case and will feed one at a time fine so i think i just need to put a 308 follower and spring in the 300 mag and put a spacer in the back.

That sounds like it will work well.
kwood94xj
05-14-2015, 11:32 AM
What about the bottom frame from a 10FCP-SR does anyone have the PN for that?
Thump_rrr
05-17-2015, 10:06 AM
What about the bottom frame from a 10FCP-SR does anyone have the PN for that?
Be careful with the FCP-SR.
19840 is the product number of the FCP-SR that would interest you. That is the older model using AICS style mags made by Accurate-Mag.
22442 is the product number for the new FCP-SR which now sports a Savage plastic detachable mag.
kwood94xj
06-02-2015, 06:17 AM
Thank you Thump_rrr This is what im looking for. off the top of your head you know of any where i can find that part for order online? the savage partfinder needs a serial number to start parts lookup. is it available anywhere else?