View Full Version : SAVAGE 110 and 112 RUM Questions
aimatit
05-18-2010, 05:08 PM
Do the actions that were used to build the 300 and 7mm RUM caliber rifles accept the large shank barrels, also will the accu trigger work on these actions?
justgoharder
05-18-2010, 05:36 PM
yes, the from-the-factory chambered RUM rifles are long action large shank's
yes, you could put an accutrigger on one of these actions.
aimatit
05-18-2010, 06:08 PM
J-G-H, Thanks for the info. I did another search and found some info on the barrel shank sizes. I couldn't find any info on the trigger change. If you know of any aftermarket stocks that are inletted for the RUM actions I would appreciate the info.
Blue Avenger
05-18-2010, 06:53 PM
dremel will finish the mag box inlet
aimatit
05-18-2010, 07:41 PM
Blue Avenger , Sir thank you- what about the action screw centers , who has stocks that are drilled on the correct ctrs ?
geargrinder
05-18-2010, 08:03 PM
Screw spacing is the same on all long actions.
Also, most stocks will have a large enough mag well to fit RUM mag boxes.
aimatit
05-18-2010, 08:11 PM
Geargrinder, Thanks for the info.
learjet
05-18-2010, 09:58 PM
i had to mill out a junk bin LA wood stock to take my rum action magbox, it was long enough, but not deep enough. Stockade stocks will make u a custom stock specifically for the rum, ive got one on order. kinda a long wait, but the prices are good. also, some rums were small shank
http://www.stockadegunstocks.com/stocks.html
efm77
05-20-2010, 08:18 AM
Make sure that your action is a large shank before you get a barrel because the first RUM's Savage made were standard shank.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.