savage model 11 vt

[rlwhitejr]

Can I get a 10 rd mag for the Savage model 11 vt?

[kwood94xj]

Unfortunately there are no commercially available 10rd mags for the 11VT. You can modify your mag depending on caliber. like http://www.savageshooters.com/showthread.php?39577-Axis-223-15rd-mag-DIY

If you have a .308 or .243 you can use a HK G3 mag (http://www.cheaperthandirt.com/product/MAG-303) and your standard mag like (http://www.ar15.com/forums/t_6_5/421601_Savage_High_Capacity_Magazine___Axis_Edge_M odel_10_etc__Short_Action_243_308_Information.html ).

The other option is to but a new bottom plate that accepts ACIS mags

Hope This helps

[rlwhitejr]

Unfortunately there are no commercially available 10rd mags for the 11VT. You can modify your mag depending on caliber. like http://www.savageshooters.com/showthread.php?39577-Axis-223-15rd-mag-DIY

If you have a .308 or .243 you can use a HK G3 mag (http://www.cheaperthandirt.com/product/MAG-303) and your standard mag like (http://www.ar15.com/forums/t_6_5/421601_Savage_High_Capacity_Magazine___Axis_Edge_M odel_10_etc__Short_Action_243_308_Information.html ).

The other option is to but a new bottom plate that accepts ACIS mags

Hope This helps

I have the .308, thanks. Bottom plate sounds like way to go. Do you know where I can find the bottom plate that accepts the AICS mags?

[kwood94xj]

Here (http://shop.pacifictoolandgauge.com/index.php?main_page=index&cPath=308_129_230)

Here (http://accurate-mag.com/bottom-metals/)
or HERE (http://www.cdiprecisiongunworks.com/)

[rlwhitejr]

my savage has the bolt release built into the trigger guard,