PDA

View Full Version : New addition to the family



Pages : 1 [2]

Jamie
05-01-2015, 06:18 PM
The Barrel is 30" long and is profiled so I can do at least 5 or 6 set backs so no worries there, it burns Retumbo so I figure I will get 500 quality shots, and then have it rethroated that is what winter is for.

Dean

You may get some stacking with Retumbo in the neck leading to erratic pressures, I did. Also wasn't slow enough to run the 26 Nosler well. I would start looking for US869 as it will be able to flow through the case neck better.

jonbearman
05-04-2015, 05:49 PM
You must have calluses on your shoulder.LOL

LoneWolf
05-04-2015, 05:50 PM
Will the AMAX's hold together at that speed?

scope eye
05-04-2015, 06:21 PM
Will the AMAX's hold together at that speed?

Yes they will, The bullet RPM is the same as a 243 with an 8 twist sending them at 3000 fps 250,000 RPM. I am not quite there yet but close with no signs of pressure as of yet, I am out of 105s so I am into my 107s now.

Dean

LoneWolf
05-04-2015, 06:37 PM
You should try a box of the 115 DTACs. They've been awesome in my 243 at 2950. They're well priced too. They're kid of like a longer heavier SMK made by Sierra to David Tubb's specs.

Hotolds442
05-04-2015, 06:49 PM
You should try a box of the 115 DTACs. They've been awesome in my 243 at 2950. They're well priced too. They're kid of like a longer heavier SMK made by Sierra to David Tubb's specs.
Interesting.........

scope eye
05-04-2015, 07:33 PM
I knew I would be able to stabilize the 105s and 107s, since both my 6mm Mach IV which is basically a necked down 7mm Rem mag and my 6mm WSM which are both 12 twists, send them well over the 4000 mark and stabilizes no problem.

Dean

PS: Who carries those Dtacs.

LoneWolf
05-04-2015, 08:49 PM
You have to get them through David Tubbs website.