View Full Version : Model 10FCP 5R 20 Stripped Stock screw hole HELP!!
kirkd1
04-09-2015, 02:32 PM
I have a self inflicted problem in where I stripped the screw hole (yes I learned my lesson) under the bolt release on the trigger guard. The screw still goes in and screws into the action I believe but I am worried that it is may lead to an issue with the stock not fitting well or something else. Is the anyway I can fix it without buying a new stock?
Thanks,
Kirkd1
Russmerle
04-10-2015, 05:08 PM
Maybe this?
http://www.amazon.com/Woodmate-2498-Grip-Screw-Repair/dp/B001B38ALG
tufrthnails
04-10-2015, 05:41 PM
you stripped the screw or the threaded hole in the receiver? There are no threads in the stock.
willyg09
04-10-2015, 09:12 PM
If you are talking about the wood screw type fastener, i would use a two part expoy to fill the hole and apply a release agent to the screw and let it sit until cured. I have done this process on my truck grille tabs before and worked like a dream.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.